Locktite Black Contact Adhesive
P/N30540
Directions: 1/Clean surfaces thoroughly. Use abrasives to remove any powdery mold release from new materials. 2/ Apply a thin, even film to both surfaces. Allow to dry. 3/ Apply a second thin coat of adhesive to sections of materials not over 3 feet long. 4/ Bond immediately. Avoid putting adhesive on exposed painted surfaces.
(this came with my p/t seal from Go Westy) works great.
bob

> A couple of weeks ago there was a thread on what sticky substance NOT to use
> on pop top gaskets.  I don't recall seeing what the PROPER glue might be.
> My Westy has glueless pop top seals and they are falling off from their own
> weight after about three years.  What might be a good adherative to stick it
> back up?
>
> Thanks,
>
> Tom Salicos
>
> '87 Syncro Westy EG-33