At  8/20/2008 12:26 PM,Mike S wrote:
>At 02:59 PM 8/20/2008, Courtney Hook wrote...
>>I would have to agree to disagree on the term cheap chinese, mixed
>>with
>>crap.
>
>Feel free to disagree with facts all you want. Granted, China does make
>some good stuff, but 90% of what Harbor Freight has is crap.

I disagree with your "90%" of HF is crap, some is, some isn't but 90%
is way too high a number. I don't expect you to agree but I don't buy
off there catalog either, my HF shopping is done ONLY at the store.

I also disagree with the subject/statement of this thread. I worked
at a front end shop for over 5 years and in the time I changed a lot
of ball joins. A lot of them, and our only "press" was a vice mounted
on the bench for support, drifts of various length, large sockets as
adapters and a 5 lb hammer.

Rob
becida@comcast.net