heh heh....

Yes I realized that as I was soldering them.

I'll either install a switch or ciggy plug on them.

For sure though, a potential "shell game" to get them on. Not hard
though. (had to do it on the bench as I kept pushing them on/off as I
worked on them)

As long as no one pushes one, I'm golden. If someone does, well it's
just another campsite game.

I call it the "Sylvania Switch Shell Game". --- ;^)

If the 5 minute epoxy holds the lights/magnets to the wood, this will
be a useful exercise in recycling IMHO.

Neil.

On Sat, Aug 23, 2008 at 2:53 PM, mdrillock <mdrillock@cox.net> wrote:
> You do realize that all 3 lights must be switched ON for it to work with the
> 3 wired in series.
>
> Since there are 8 possible combinations of on/off and only 1 works your
> chances of getting it on may be low since there is not on/off marking on
> them to go by.
>
> This also means that all 3 will always be on together or off together. 7
> switch combinations for all off, only one for all on.
>
>
> Mark
>
>
>
> neil N wrote:
>>
>> Hi Ed.
>>
>> I have these:
>>
>> http://tinyurl.com/922yn
>>
>> Was just trying to learn how LED's wire up.
>>
>> Each one still works, but for some reason, they don't work when + of
>> one is wired to - of another (3 total) in series.
>>
>> i.e.
>>
>> + - + - + -
>>
>> Anyhow.....
>>
>> It should work.
>>
>> Neil.
>>
>>
>>
>> On Sat, Aug 23, 2008 at 2:15 PM, Edward Duntz <eduntz@hotmail.com> wrote:
>>
>>>
>>> I have wanted to do something like this for quite a while. There are so
>>> many options for LED lights, but most use a few AA or AAA batteries, but not
>>> eight of them, which would give you 12 volts. I like the lights, but don't
>>> like the idea of replacing the batteries. I know, as many will point out,
>>> that the batteries do last a long while, but I like to have everything wired
>>> to 12 volts. I did find some similar lights at Cabelas that are meant for
>>> direct 12 volt wiring. Like many projects, I bought them but havan't wired
>>> them in yet.
>>>
>>> Which version of the "Dot-It" did you get? I've got the ones with a
>>> motion sensor that activates two levels of brightness. The light is a very
>>> clean white, the best I've seen in an LED. It has one very bright LED. I
>>> think it is called the Dragon light. It comes in white, black, and silver.
>>> It has a very low profile. The others I've seen swivel, one version is
>>> waterproof, and there is a rectangular one which pivots as well.
>>>
>>> Here's a link to the Cabaela's lights:
>>>
>>> http://tinyurl.com/6z6kza
>>>
>>> The third one over is the one I have- built-in switch, surface mount, 8
>>> LEDs.
>>>
>>> Ed in CT
>>>
>>
>>
>>
>
>
>

--
Neil Nicholson '81 JettaWesty "Jaco
http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
http://web.mac.com/tubaneil
http://tubaneil.googlepages.com/