There are several differences we need to know before anyone can say if the parts are available - mostly the year, but also manual or power steering. If you have power steering, but put in a spindle from a non-PS Vanagon, The geometry will not be correct. The tie-rod attach ppoints are different distances from the vertical rotation centerline.
�

--- On Sat, 9/13/08, Cullen Stewart <cullberly@VERMONTEL.NET> wrote:

From: Cullen Stewart <cullberly@VERMONTEL.NET>
Subject: Front spindle possibly needed
To: vanagon@GERRY.VANAGON.COM
Date: Saturday, September 13, 2008, 11:01 PM

     I recently had bearing failure on the drivers side front spindle. The outer
bearing is crispy and dry. The inner bearing is fine. I assume it had grease
seeping out of the speedometer cable hole and it just ran dry over time. The
passengers side looks clean and fully greased. 
     The problem is that the bearing race seems to have welded itself onto the
spindle. Upon removal it left slag on the spindle that does not want to come
off. Also, the threads on the spindle look a little abused. Does anyone have a
new spindle that I can purchase near central Vermont? Also, what is the size die
I need to chase the threads on the spindle?
Thanks