

| Subject: | Re: [WetWesties] Sliding door doesn't |
| From: | Michael Sullivan |
| Date: | Tue, 16 Sep 2008 19:18:30 -0500 |
Did you spill a beer in it? Happened to me, errr my friend, and had to try as mentioned above-pull from outside and tap it from inside. Then clean seals. :-) On Tue, Sep 16, 2008 at 7:03 PM, Scott Daniel - Turbovans < scottdaniel@turbovans.com> wrote: > I just use a really good penetrating synthetic spray grease. > many great ones to choose from. > one fine one is 3M Multi-purpose spray lubricant ....... > penetrates nicely, lubes really nicely. > makes a fine treatment for rubber too apparently. > just spray *everything* that moves. > even the ash tray and wiper arm pivots, and seat belt latches etc. etc. > > in the military they once said.......for new troops .........'if it moves, > salute it, of it doesn't, paint it.' > > For us it's .................. 'If it moves, spray lube it, if it doesn't , > treat it for corrosion repair and prevention." > Scott > www.turbovans.com > > ----- Original Message ----- > From: "neil N" <musomuso@GMAIL.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Tuesday, September 16, 2008 4:04 PM > Subject: Re: [WetWesties] Sliding door doesn't > > > Re: lube. If you "get into it" and lube the tracks too, don't do what I >> did. >> >> Use some kind of white or (?) grease on the upper/lower tracks around >> opening. I used black WB grease. Kinda messy. Rooky mistake! Also >> there are 2 or so screws holding the cover on the slider for the arm >> if you lube that. >> >> As per the first thing Scott said, I'll bet it's the adjustment on the >> cable. Probably was loosening over time. >> >> Best of luck! >> >> Neil. >> >> >> >> On Tue, Sep 16, 2008 at 1:04 PM, Matthew Snook <matt@snooksband.com> >> wrote: >> >>> Argh. >>> >>> My sliding door was balking yesterday, opening only hesitantly when I >>> turned >>> the handle. It seemed as if something wasn't releasing at the rear latch. >>> This morning it refuses to open at all. And helpful hints as to what I >>> should look for when I get in there? Maybe all it needs is some good >>> lubricant, right? That's the sort of fix I enjoy. But at this point I >>> can't even open it. >>> >>> Matt >>> >> -- Michael in San Antonio 91GL AT 'Gringo'
Have something to add on this topic today? Revive this thread in the forum »