Today I pulled the rear cabinet and fridge in order to install seat
rails and check out why my fridge didn't stay lit underway. I found
some rust so I wirebrushed it, treated with naval jelly and rustoleum
and then undercoating. All went well.

When I took apart the combustion chamber, I found that previous
service left a small screw dropped smack into the tube that comes out
the front, the one you use to drain/clean out the chamber. I also
found some problems in the way the flue vent was connected and
corrected that.

I didn't pay attention to one thing, though. Under the sink, do the
wires from the faucet switch connect to the two yellow wires in the
plastic housing?

Thanks,

Jim