Necessity is the mother of invention and owning a Vanagon begets ingenuity.
Jerry

----- Original Message -----
From: "Allan Streib" <streib@CS.INDIANA.EDU>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, October 27, 2008 12:04 PM
Subject: Re: question about 4-speed shift rod front "fork"

> Something just strikes me as "wrong" that I should have to pay the
> dealer for a new shift rod just because a little nylon piece has fallen
> off.  I mean it's basically just a piece of pipe, nothing at all to
> "wear out" otherwise.  So I decided to see if I could fabricate
> something.
>
> A small plastic/poly kitchen cutting board from Wal-Mart provided the
> source material.  I measured the bare metal finger on the shift rod
> fork, and used a jigsaw to cut a small piece out of the cutting board.
> Then using a file and sandpaper I shaped the piece, tapering one end,
> and also making it a little thinner since the stock cutting board was a
> little too thick (comparing to the other side of the fork which still
> has it's cover piece intact).  Then using a dremel tool I made a hollow
> slot (like a mortise) in the piece so it would fit over the bare metal
> fork on the shift rod.
>
> I degreased the metal with brake cleaner, filled the hollow in the
> plastic piece with JB Weld, and pressed it into place.  We'll see how it
> holds up, but I think it's worth it as an experiment.
>
> Allan
> --
> 1991 Vanagon GL
>
> "Jaime Forero" <jforero@sbcglobal.net> writes:
>
> > You should have a nylon cover on each of the 2 fingers of the fork.  I
> > bought the rod from VW about a year ago and replaced it.  Grease up
> > the contact area as well as you can.  Adjust and you will be in
> > business.
> > Cheers
> > Jaime
> >
> > ----- Original Message -----
> > From: "Allan Streib" <streib@CS.INDIANA.EDU>
> > To: <vanagon@GERRY.VANAGON.COM>
> > Sent: Saturday, October 25, 2008 1:47 PM
> > Subject: question about 4-speed shift rod front "fork"
> >
> >
> >> Is there supposed to be a plastic or nylon "finger" on each side of the
> >> fork on the front of the shift rod?  Looking at the illustration in the
> >> Bentley it seems that there is, I only have one on the 3/4 shift gate
> >> side, not on the reverse gate side.
> >>
> >> If I'm missing one, are these available?  Or would I be looking at
> >> trying to fabricate something?  Anyone know the dimensions?
> >>
> >> Allan
> >> --
> >> 1991 Vanagon GL
> >
>
> --
> 1991 Vanagon GL
>
>
> --
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.549 / Virus Database: 270.8.4/1749 - Release Date: 10/27/08 7:57 AM
>
>