I used a replacement plug that would typically go on the end of an extension
cord, and a little Goop Glue, it was a perfect fit, and worked fine for a
number of years...  Until I landed a OEM replacement at the Buses by The
Beach raffle last year.

Jack R.
84 Westy Wolfie

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
William Treadway
Sent: Saturday, November 01, 2008 6:34 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Utility Plug

The external 110v plug on the side of my syncro is getting old and the
blades that go into the external power source are loose.
How hard is it to replace the plug?
do I need a special replacement or is it a standard RV external plug>
Thanks in advance.

Bill Treadway
281-850-8141 Cell