Nope, it's the nut face. Sorry, I should have been more specific. I'm going
to drive over to Sears a little later and see if they have that Lug-Out that
was recommended.

Thanks,

Bryan

  _____

From: David Milo [mailto:dellaone@gmail.com]
Sent: Sunday, November 02, 2008 1:47 PM
To: B Feddish
Cc: Vanagon
Subject: Re: Lug nut stripped

I think perhaps Bryan may be talking about the thread interface (nut / stud)
being stripped and not the nut faces where the wrench fits. I have
experienced what he is referring to after visits to Sears et al, and if it
is the threads that are stripped, I would definitely recommend new hardware.

Cheers,

Dave Milo

On Sun, Nov 2, 2008 at 11:59 AM, B Feddish <bfeddish@netreach.net> wrote:

My mechanic must have set his torque wrench set on "bolt sieze" as it took
forever to get the lug nuts off my rear wheels to put on the snows.  I ended
put striping one of the bolts good. Real good. Is that something I can go
get a tool for at Sears hardware or should I just wait until the shop opens
and bring it over this week?

Thanks,
Bryan