And FWIW, reverse threaded fittings I've seen, have a notch on each point of
the nut.

Neil.

On Wed, Nov 12, 2008 at 8:40 PM, Dennis Haynes <d23haynes57@hotmail.com>
wrote:
> The only reverse thread is the POL fitting between the regulator and the
> tank valve. Everything else is conventional brass, copper tube flare
> fittings.
>
> The fridge can operate on propane with no 12 volts connection at all. The
> only loss will be the rear fan and flame on indicator light.
>
> Dennis
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Don Spence
> Sent: Wednesday, November 12, 2008 3:10 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: fridge....saga continues
>
> uh, left hand thread on the propane fitting?
>

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------