Larry-

Here's what I did. The top bunk pads are the same size as the bottom
bunk. Go to http://www.overstock.com/Home-Garden/Serta-2-inch-Memory-Foam-Topper-with-Contour-Pillows/2653495/product.html
  and purchase the full size, 2-inch, 3 lb density memory foam
mattress "topper". Cut it down to size to fit the top bunk covers
using the pads as a template. Store up top when not in use - use on
top of the bottom bunk as a topper. 2" of 3 lb memory foam is really
nice to sleep on. It covers up all the bumps and you'll sleep like a
baby.

Jeff

On Nov 15, 2008, at 2:39 PM, Automatic digest processor wrote:

>
> Date:    Sat, 15 Nov 2008 15:21:50 -0700
> From:    Larry Chase <roadguy@ROADHAUS.COM>
> Subject: Westy Sleep Solutions
>
> Volks,
>
> Over the years, like many, I have been experimenting with the best
> ways to enhance the comfort of the OE
> Westy lower bed.
>
> Here's a couple of approachs I have or will try.
>
> Note: Lower West Bed Size ... Width 46" x  73" length
>
> Option 1
>
> High Density foam cut to size
>
> 2" x 46" x 73" at 5.3/5.5 density
>
> http://www.foambymail.com/
> - also sell on ebay under foambymail
>
> Had them make a mattress cover for a few $$
>
>  Current set up and works pretty well. Would like a bit more
> thickness but don't like the bulk of a thicker pad.
>
> Pros:
> - Reasonable cost
> - Easy to fold the bed away with the pad attached
>
> Cons:
> - Worked well 2 yrs ago but back needs a bit more cush now.
> - A thicker pad would help but don't like the bulk of packing away a
> thicker pad.
>
>
> Option Two
>
> Conventional Air Mattress made for pickup truck beds
>
> http://www.tentsontrucks.com/air%20beds.htm
>
> Truck Mattress: 75" X 47" X 5"
>
> Pros:
> - Reasonable cost
> - At 5" thick provides nice cushion for sleeping
>
> Cons:
> -  Very marginal quality, thin vinyl construction prone to easy
> puncture
> -  Fuzzy velvet surface on sleep side is very susceptible to picking
> up lint and such.
> -  Looses some amt of air overnight, as many inexpressive air
> mattresses do
> -  Have to carry an air pump ... we used one of the Coleman
> rechargeables.
> -  Fit is a little tight on width
> - Has to be deflated every day and re-inflated every night.
>
>
> Option Three
>
> * Haven't tried this yet but considering a purchase.
>
> Custom "Therma Rest" type mattress
>
> http://www.solacejh.com/
>
> They will custom make to any size length x width and up to a 3"
> thickness
>
> This is a very high quality "Therma Rest" type of self inflating
> mattress.
>
> Pros:
> - Very high quality construction and materials.
> - easy inflate and deflate
> - No air pump needed
> - Packs down very small .. will fold up in bed
>
> Cons:
> - Cost, most expensive of the three options.
>
>
> larry
> roadhaus.com

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------