If you use vise-grips on the fasteners you won't have to buy new ones
or replace them with non-breakaway bolt. Just use the same one again.

Jim

On Sun, Nov 16, 2008 at 4:57 PM, neil N <musomuso@gmail.com> wrote:
> Hmm....
>
> yah I'm going outside now. Was curious about how best to get at it.
>
> Thanks for the tip. Removing the steering column from the dash etc.
> doesn't take long.
>
> Neil.
>
> On Sun, Nov 16, 2008 at 2:35 PM, Jim Felder <jim.felder@gmail.com> wrote:
>> ......I used a wonderbar to pry some distance
>> between the steering components where the disk fit into place. Since
>> then, having easily removed the steering column and shaft to pull the
>> dash, I'd spend a few minutes doing that that all the frustrating
>> prying.
>>
>> Jim
>>
>

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------