

| Subject: | Re: Engine runs with no AFM? |
| From: | David Milo |
| Date: | Sun, 23 Nov 2008 21:15:36 -0500 |
Yes indeed, It will run, and you can even move the van around for short distances, but I wouldn't recommend it. Dave Milo On Sun, Nov 23, 2008 at 6:41 PM, Edward Maglott < emaglott@buncombe.main.nc.us> wrote: > I was working on the van yesterday and had the AFM disconnected from > everything to look for a water leak in the area of the coolant > distributor. It's a strange leak that stops when the engine warms > up. So I decided to start the engine and take a look under > there. Turned the key and got a horrible noise since the air cleaner > housing was sitting on the alternator fan. D'oh! OK, moved that and > started the engine and it ran. So no air going into the engine was > going through the AFM and the AFM was not connected electrically > either. Hmmm, I thought. Must be the idle circuit keeping it > running. I opened the throttle and expected it to die, but no, it > revved up just like normal. Engine was cold, so was in open loop > mode, but still. Maybe since it had no load on it the engine was > able to spin up? Seems like it would have gone terribly lean. Any > ideas on this curiosity? This is a 2.1 digifant. > > Edward > > ------------------------------------------------------------ > + To unsubscribe from the Vanagon List send an e-mail to > + listserv@gerry.vanagon.com with SIGNOFF VANAGON > + in the body of the message. > ------------------------------------------------------------ > ------------------------------------------------------------ + To unsubscribe from the Vanagon List send an e-mail to + listserv@gerry.vanagon.com with SIGNOFF VANAGON + in the body of the message. ------------------------------------------------------------
Have something to add on this topic today? Revive this thread in the forum »