Any good locksmith can cut a key by using a 'secret' method of
inserting a blank into the lock, turning it, hand-filing based on
indentations, and repeating this process until a key is made.  I've
had keys made using this method for two vehicles.

On 11/23/08, Steve Sandlin <vwcarlocks@hotmail.com> wrote:
> VW no longer has records of key codes to VIN on Vanagons.  Any competent
> locksmith can cut it from code using the code on any of the locks.  The
> front handles are the easiest.  The locksmith will tell you that that 4
> digit code does not come up, but proceed the 4 digits with the letter N and
> it will work.  Cutting it by inspecting tumblers is not effective as the
> ignition has more tumblers than the other locks.  You can make a key that
> fits the doors but not the ignition.  The correct blank for the locksmith to
> use is ILCO X110, NOT X9 as they may try.  They will not have a rubber head
> or original key in all likelyhood.
> Steve Sandlin
> Registered Locksmith
> License B12682
> ------------------------------------------------------------
> +    To unsubscribe from the Vanagon List send an e-mail to
> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
> +    in the body of the message.
> ------------------------------------------------------------
>

--
Sent from my mobile device

Chris S.
Disclaimer: "Death and serious injury may occur"

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------