One thing you did not say you have checked is the wiring between
the coil (terminal 15?) and the ECU. This is the wire that feeds
the ignition signal to the ECU. Without this signal the ECU will
not fire the injectors.

Just a thought.

David

--- On Tue, 12/2/08, Zoltan <thewestyman@GMAIL.COM> wrote:

> From: Zoltan <thewestyman@GMAIL.COM>
> Subject: Won't spray gas, won't start
> To: vanagon@GERRY.VANAGON.COM
> Date: Tuesday, December 2, 2008, 3:22 PM
> I am having a hard time finding the fault.  This is a 2.1
> engine.
> Checked a lot of things already, but nothing.  The
> following has already been done;
>
> Changed relays with known good ones,
> changed distributor, to make sure Hall sender is working,
> changed ECU,
> fixed ground for ECU,
> changed ignition switch, just in case.
>
> I have good spark,
> fuel pressure is 35,
> The injectors are not getting electricity.
>
> I have no idea.
> Zoltan
>
> ------------------------------------------------------------
> +    To unsubscribe from the Vanagon List send an e-mail to
> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
> +    in the body of the message.
> ------------------------------------------------------------

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------