The blower does not affect the airflow for the defrost.  I'm guessing
your cable is bent or unhooked from the leaver.  You can take the levers
off, and then heater control panel off and investigate.  Those levers
just pull out, and the panel have two small plastic "pins" that get held
into place by clips on the dash.  You have to be very careful prying
that panel off not to break the "pins".  BTW, one of my "pins" was
broken when I got my Westy and I fixed it with epoxy.  If its' not a
problem with the cable at the heater controls, it's likely at the other
end of the cable where the problem is.   

Pascal
'84 Westy 

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Slloth
Sent: Wednesday, December 03, 2008 11:42 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Defrost Windshield

It seems I am getting no airflow regardless of the position of the top
lever.  Is this fixable with out removing dash?  Btw my blower is not
working right now...does that effect airflow for the defrost?  I am
under the impression it is "fresh air".

--
'84 Westfalia, 1.9L
'73 FJ40, 2F

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------