Karl, do you always mount the heaters on the passenger side? Have you ever put them on the driver side. Curious to know, as I still haven't installed my green one (read: big size). 

From: Karl Mullendore <groups@WESTYVENTURES.COM>
To: vanagon@GERRY.VANAGON.COM
Subject: Re: [VWVANFULLTIMERS] Propex heaters : group purchase offer

> Are you referring to the exhaust and inlet pipes for the burner, or the
> heat ducting? The stainless flex pipes for the burner can make some
> fairly tight bends, however the heater should be mounted on the floor or
> sidewall so that the pipes exit the interior in a short distance as
> possible; from there they can bend.
> 
> Karl
> 
> M'obeechi wrote:
> > I have the larger Propex. My challenge is that I need to install it
> > on the passenger side, under the rear seat, but no further from the
> > passenger side than those two factory holes meant for the stock rear
> > heater coolant lines. Those vent hoses the Propex came with are large
> > enough that turning a sharp corner or turn, doesn't look possible. So
> > maybe this means I have to have something fabricated, or else maybe
> > these is some product out there that I'm not aware of that allows for
> > venting hoses through tighter turns.
> 
> ------------------------------------------------------------
> +    To unsubscribe from the Vanagon List send an e-mail to
> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
> +    in the body of the message.
> ------------------------------------------------------------
> 

----- End Original Message -----

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------