All dimensions can be found in the brochure:
http://propexheatsource.co.uk/pdf/Heatsource_A3_brochure.pdf

Yes, about 4" tall. I would recommend some air space (1" if possible) or
heat-insulating material above the heater so as to not affect the efficiency
of the fridge too much. You could gain at least 1/2" but cutting the wooden
floor where the heater will mount. Remember also that the propane tank is
below, so be sure to locate the burner exhaust and inlet to avoid it.

Karl
www.propexusa.com

On Thu, 11 Dec 2008 16:29:03 -0800, PB <pbrattan@GMAIL.COM> wrote:

> Karl,
>what are the physical dimensions of the HS2000?

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------