Thanks for the brochure, Karl.
Patti
*****************************

On Fri, Dec 12, 2008 at 7:37 PM, Karl Mullendore
<groups@westyventures.com>wrote:

> All dimensions can be found in the brochure:
> http://propexheatsource.co.uk/pdf/Heatsource_A3_brochure.pdf
>
> Yes, about 4" tall. I would recommend some air space (1" if possible) or
> heat-insulating material above the heater so as to not affect the
> efficiency
> of the fridge too much. You could gain at least 1/2" but cutting the wooden
> floor where the heater will mount. Remember also that the propane tank is
> below, so be sure to locate the burner exhaust and inlet to avoid it.
>
> Karl
> www.propexusa.com
>
> On Thu, 11 Dec 2008 16:29:03 -0800, PB <pbrattan@GMAIL.COM> wrote:
>
> > Karl,
> >what are the physical dimensions of the HS2000?
>
> ------------------------------------------------------------
> +    To unsubscribe from the Vanagon List send an e-mail to
> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
> +    in the body of the message.
> ------------------------------------------------------------
>

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------