I guess I'm wondering why you would need a welder to put a poptop on your synchro?? Unless I'm missing something, you usually CUT the metal top off, and install the poptop, after putting a plastic seam/welt around the raw metal edge of the top you have cut off. I'm sure there are smarter souls on here than me that will chime in.
Regards,
Courtney

----- Original Message -----
From: Mike Miller <mwmiller@CWNET.COM>
Date: Wednesday, December 17, 2008 5:59 pm
Subject: Pop-top exchange
To: vanagon@GERRY.VANAGON.COM

> Vantites,
>
> There are three of us in the SF Bay area who are either going to
> or are
> thinking about putting Westy tops on our syncros.
>
> My son, a certified welder, says that a continuous feed MIG
> welder is the
> thing. Anyone have or  know of a good deal on one of these
> things within
> striking distance of SF?
>
> Mike
>
> ------------------------------------------------------------
> +    To unsubscribe from the Vanagon List send an
> e-mail to
> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
> +    in the body of the message.
> ------------------------------------------------------------
>

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------