'rark' is an intersting word.
I like it.
just wanted to say it feels like the 12 point ones are made of much harder
metal.
I think of hundreds of the 12 point ones I've installed, or ones I was
removing, I've had only one strip out where the tool engages,
versus many dozens of the 6 point allen ones - those strip out pretty
easily.

----- Original Message -----
From: "Dave Yates" <transparu@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, December 15, 2008 3:22 PM
Subject: Re: Vanagon CV Joint Fasteners

> About 2 years ago I replaced my hex-head bolts with these from
> Autohaus Az.  I recently had to remove all CV joints (to replace wheel
> bearings) and found these MUCH easier to engage with in the dim rark
> recesses of the outer CV joints..  FWIW.
> Dave
> downunder
>
>
> 2008/12/16 pdooley <psdooley@verizon.net>:
>> That would be http://tinyurl.com/vanagoncvbolts
>>
>> Autohaus FTW.
>>
>> -----Original Message-----
>> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
>> Of
>> Florian Speier
>> Sent: Monday, December 15, 2008 12:36 AM
>> To: vanagon@GERRY.VANAGON.COM
>> Subject: Re: Vanagon CV Joint Fasteners
>>
>> I would go for the german 12 point ones, available here for $0.45:
>> *http://tinyurl.com/vanagoncvbolts
>>
>> florian
>> *
>>
>> ------------------------------------------------------------
>> +    To unsubscribe from the Vanagon List send an e-mail to
>> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
>> +    in the body of the message.
>> ------------------------------------------------------------
>>
>> ------------------------------------------------------------
>> +    To unsubscribe from the Vanagon List send an e-mail to
>> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
>> +    in the body of the message.
>> ------------------------------------------------------------
>>
>
> ------------------------------------------------------------
> +    To unsubscribe from the Vanagon List send an e-mail to
> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
> +    in the body of the message.
> ------------------------------------------------------------

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------