

| Subject: | Re: '86 Westy A/C Problem |
| From: | Deke Rivers |
| Date: | Tue, 13 Jan 2009 16:26:32 -0600 |
It is an early '86. I actually picked it up at the Westfalia factory - but it has American specs. It was part of a European Tourist Delivery Program. If these items aren't at the 'D' pillar can you tell me where they would be? Deke -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Mike Collum Sent: Tuesday, January 13, 2009 4:02 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: '86 Westy A/C Problem Some early '86 Westy air conditioning was dealer or port of entry installed using units that are identical to the '85 types. If that is what you have then there won't be anything relating to the A/C in the D pillar. Mike Deke Rivers wrote: > Stephen, > > I can see no way to do that. The sides of the shelves look like they are > mitered into the side walls of the closet. There are no supports, no > brackets, no pegs, no screws. > > Deke > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Stephen Grisanti > Sent: Tuesday, January 13, 2009 3:25 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: '86 Westy A/C Problem > > If you remove the shelf or shelves in the back part (cabinet part by the > back door, not the hanging locker) you can then remove the little enclosure > box to gain access to the electrical and hoses. > > Stephen > > --- On Tue, 1/13/09, Deke Rivers <dekeriv@BELLSOUTH.NET> wrote: > > From: Deke Rivers <dekeriv@BELLSOUTH.NET> > Subject: '86 Westy A/C Problem > To: vanagon@GERRY.VANAGON.COM > Date: Tuesday, January 13, 2009, 3:17 PM > > I'm trying to do some electrical troubleshooting on my early "86 Westy > camper. Can anyone tell me how I can get to the low-pressure switch and the > A/C relay? From what I've been able to find in the archives and other > places it appears to be at the "D" pillar behind the closet. But it > is > beyond me to figure out how to get to it. > > > > Thanks > > Deke > >
Have something to add on this topic today? Revive this thread in the forum »