Thanks John. Grounding the high pressure wire from the unit, made
sense in my mind.

I assume grounding that wire won't affect the electrics of the low
pressure side on the Dynamic .... Unit.

On Thu, Jan 8, 2009 at 5:08 PM, John Lauterbach
<jhlauterbach@bellsouth.net> wrote:
> At one time one of the list vendors had a copy of the wiring changes
> that needed to be made to install a late model instrument cluster into
> an older model van.  I know that I had to do the wiring change on my '84
> when I installed a new instrument cluster and that one of the pins had
> to go to ground to keep the buzzer from sounding.
>
> John
>
> On Thu, 2009-01-08 at 14:59 -0800, neil N wrote:
>>
>> Maybe try grounding the pin T14 ......