| Subject: | Re: Gauge panel regulator was Re:...gas guage) |
| From: | Mike S |
| Date: | Fri, 30 Jan 2009 13:50:22 -0500 |
At 12:59 PM 1/30/2009, David Beierl wrote... >Sounds like a candidate for a +12v regulator and a few diode drops, or >a +5 and a five-volt zener on the ground lead. It's not like it's a >precision application... A 78M10 is an easier choice, but note that the TCA700Y pinout is different than standard VRs (input and output are swapped). You would also need to add input and output bypass capacitors.
Have something to add on this topic today? Revive this thread in the forum »