At 12:54 PM 1/29/2009, jon wrote...
>So, anyone have any suggestions on how to get a drum off that's stuck
>to
>the hub/axle? I can't see any good way to use a large puller. The
>backing plate would have to be bent to get the hooks around the drum.
>Suggestions?

Something which works well for discs, might also work for drums.

Find a parking lot or other non-traffic place, and loosen up the lug
nuts on the problem wheel enough so they're just a bit sloppy. Drive
5-10mph, and pull up hard on the e-brake. Again, going in reverse. The
braking force has to travel from the drum to the hub, and can help
brake the rust bond.