Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Master cyclinder replacement and do you have one to sell/trade
From:A J I
Date:Tue, 10 Feb 2009 01:00:40 -0500

I am not looking for a used one. I was checking to see if anyone had one
that was purchased and never used that is sitting on a shelf. I figured a
fellow vanowner could use getting some money more than some company. I
wouldnt do all that work to put a used unit on, although I did consider a
reman one. Seems that the remans and generic aftermarket ones are in the $50
to $60 range some with warranty some without. New ones seem to be in the $75
to $100 range and not much difference in the warranty so I am still mulling
that over. I also figured that it may be possible to trade some of the 99
bay stuff I have here and reduce that pile a little.
Thanks for the input, I appreciate it

A J

On Tue, Feb 10, 2009 at 12:52 AM, Doug Alcock <doug.alcock@gmail.com> wrote:

> Not sure what you're looking for in terms of a master cylinder -- but don't
> cheap out on a good used/known good one etc.Get a new one --- BTDT.
>
> Cheers,
> Doug
>
> On Tue, Feb 10, 2009 at 12:13 AM, A J <flavanagon@gmail.com> wrote:
>
>> I have a 91 auto and have determined that the brake master cyclinder
>> needs replaced. Its an automatic so at least I dont have to mess around
>> with the slave.
>> I was chatting online with a van owner and he said he may have a master
>> because he bought one for his but then sold the van, He is looking.
>> That gave me the idea to check here on the off chance that maybe someone
>> has done the same thing and has a master just sitting and would like to
>> sell it. I did find out that from 1980 through 1991 they are all the
>> same so if there is one just sitting and you would like to sell it or
>> maybe trade for some bay parts then by all means please contact me.
>> Part two is that I have never replaced a master on a Vanagon can anyone
>> enlighten me as to the proper proceedure or to any tricks/shortcuts? I
>> am guessing that I will have to remove the instrument cluster and the
>> column cover but not sure about any of it and can use any
>> help/information available.
>>
>> Thanks .
>>
>> A J
>>
>> 1987 GL AC 4spd
>> 1991 GL AC Auto
>>
>
>
>
> --
> http://www.dougalcock.com
>