At 09:02 PM 3/20/2009, Max Wellhouse wrote:
>radiator fan area.  The other is a skinny blue/red wire with a female
>spade encased in a yellow insulator.  It originates from  what
>appears to be the brown multi point connector in the back of the fuse
>block.  The color codes certainly hint of cooling system, but unless
>they plug into the J101 relay, I don't know where they go.  I have

ATB 97.201, the only brown connector is H, the six-contact one that
connects the universe to J101.  It has three wires, at the three
outer corners -- the other three are empty (97.216, 146-151).  So if
that wire comes from the bottom (pin 6) of connector H, it should go
to pin one of the fan thermoswitch.  The 1.5 is probably a type --
all it's doing is driving the relay coil, 0.5 is plenty for that and
would match the 0.5 ground wire for the same coil.

  --
David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/
'89 Po' White Star "Scamp"