Wow, that's high temp lube!!  2800 degrees F...

On Tue, Apr 7, 2009 at 12:21 PM, neil N <musomuso@gmail.com> wrote:

> Thanks Jake. Nice to know re copper antiseize.
>
> FWIW listers, the product that c/w the rebuilt calipers (in small
> "pillow bag")  is called "Ceramlub 2800*F". They have a web presence:
>
> http://ceramlub.com/
>
> Neil.
>
>
>
> On 4/7/09, Jake de Villiers <crescentbeachguitar@gmail.com> wrote:
> > I like a really thin film of copper anti-seize, so some super high temp
> > synthetic grease should be good too.
> >
> > On Tue, Apr 7, 2009 at 9:04 AM, neil N <musomuso@gmail.com> wrote:
> >
> >> Hi all.
> >>
> >> Installed new calipers, rotors, pads. Caliper hardware kits c/w a
> >> little tube of grease which I assumed was only for the back of the
> >> pads, but began to think it may be for lubing certain points on front
> >> caliper/pads/hardware. So on with the search.
> >>
> >> Found this in the archives:
> >>
> >> http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind0209B&L=vanagon&P=R2211
> >>
>

--
Jake

1984 Vanagon GL
1986 Westy Weekender "Dixie"

Crescent Beach, BC

www.crescentbeachguitar.com
http://subyjake.googlepages.com/mydixiedarlin%27