

| Subject: | Re: "Whump whump" noise from front RH side. |
| From: | neil N |
| Date: | Fri, 10 Apr 2009 18:52:42 -0700 |
Thanks John. I recall Frank C writing about a Yoko tire disintegrating on him. This was some years ago IIRC and may have been a different model, but the thought crossed my mind (and promptly got displaced by, uh, I donno. Beer? ;) I appreciate the heads up/reminder. Neil. On Fri, Apr 10, 2009 at 6:05 PM, John Rodgers <inua@charter.net> wrote: > New tire or not - a tread beginning to loosen up will also cause a > whump-whump-whump. Just happened on a lady friends Oldsmobile. > > John Rodgers > 88 GL Driver > > neil N wrote: >> >> Hi all. >> >> Apologies in advance for such a long post. >> >> Problem: >> >> Turning left in circles, parking lot speed, driver window open, >> passenger closed, I hear a subtle but audible and consistent "whump >> whump whump..." from RH front. No noise turning circles in other >> direction or driving at highway/city speeds. >> >> Didn't notice sound before I replaced a bunch of front end parts >> (basically everything but upper control arm bushings and steering rack >> and steering relay box) >> >> Prior to my work, new Yoko Y370's installed on "new" used 14" steel >> wheels. A subtle vibration felt 50-60 MPH. Wheels rebalanced 2x. At >> that time, was told (and saw) that at least one of the wheels fairly >> out of round. One of my old wheels was swapped for the most out of >> round wheel. But, new used rim still on RH front wheel. Vibration >> remained at that time, but seems to be gone with the new parts I >> installed. i.e. vibration could have been there before and/or was >> exacperated due to worn front end parts. >> >> Could this sound indicate an out of round wheel? If not, what else >> should I look for? >> >> Wheel bearings installed/adjusted on the bench and vehicle, but will >> check bearing adjustments again though I doubt that is the issue. >> Aside from slight drift to right at highway speeds, (I had to swap in >> a used tie rod, fix radius arm hole, etc.) vehicle drives fine with no >> other sounds or issues. >> >> Thanks much for any sage advice, >> >> Neil. >> >> -- >> Neil Nicholson '81 VanaJetta 2.0 "Jaco" >> >> http://tubaneil.googlepages.com/ >> >> >> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines >> >> >> > > > -- Neil Nicholson '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
Have something to add on this topic today? Revive this thread in the forum »