At 08:28 PM 4/15/2009, Leo Lipert wrote:
>    Can anyone tell me which connector is for the tach? I thought I read that
>it was number 9, but if you look closely at nine, it terminates and then
>continues over to 4, I think.

Page 90.18 -- pin 9 is tach.

Check continuity from upper terminal on ignition coil (green wire) to
pin 9 of connector.  Plug in connector and check continuity from coil
to the tachometer terminal connected to pin 9.  For a quick check, if
you touch that terminal and a ground with the engine running, it
should bite you; not like the spark will, but noticeably.  If that's
good, make sure tach is getting +12 and ground from pin 8 and 3 respectively.

You didn't say year, but if it's an '87 the diagram is on pages
97.108 and 97.105, current tracks 15, 24 and 54.  The quick course on
reading the diagrams is on 97.4-5

  --
David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/
'89 Po' White Star "Scamp"