

| Subject: | Re: Surepower 1315, auxiliary fuse block, Progressive Dynamics charger, and Vitrifrigo installation questions |
| From: | Keith Ovregaard |
| Date: | Wed, 6 May 2009 21:21:56 -0700 |
Exactly what I am thinking, Loren. Cheap solution, too! <http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=92688 > Keith O On May 6, 2009, at 9:00 PM, Automatic digest processor wrote: > Date: Wed, 6 May 2009 17:47:12 -0700 > From: Loren Busch <starwagen@GMAIL.COM> > Subject: Re: Surepower 1315, auxiliary fuse block, > Progressive Dynamics charger, and Vitrifrigo installation > questions > > RE: 1314 vs 1315 > I think the issue raised between the 1315 and 1314 separators is > probably > valid. When the smart charger cycles into the desulfating mode it's > at > about 14.4 or better. Fine for an AGM battery but higher than the > lead acid > starting battery might like. Therefore the 1314, set up to charge > the aux > battery when the engine is running but not charge the starting > battery when > the aux battery is taking the charge apperas to be a safer setup. > Since I'm > using a 1315 and do somtimes camp with a solar panel setup feeding > the aux > battery, when doing that, to keep the charge going only to the aux > battery, > I'll probably pull the ground strap on the starting battery or add a > switch > on that wire.
Have something to add on this topic today? Revive this thread in the forum »