Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: How do you get to the passenger side wiper shaft?
From:Frank Condelli
Date:Mon, 18 May 2009 05:43:00 EDT

In a message dated 17/05/2009 11:00:46 P.M. Central Daylight Time,
LISTSERV@GERRY.VANAGON.COM writes:

        If your trying to change  that shaft because you broke off the
threaded portion of the shaft then it is  easily repaired.  Drill and tap the
shaft and thread in a 6mm SS bolt so  that when you cut the head off the
remaining threads will be as long and what  was there before.  Now, it's just as
good as new.  Hard part - getting  the drill to start the hole IN THE CENTRE
of the broken shaft.  Start by  making the remaining shaft flat and then
get a good centre punch to mark the  centre for a very small drill bit to get
started then work your way up to the  correct size for a 6mm tap.  NOW, why
you broke it off in the first place I  bet is because you kept trying to
tighten up the nut to keep the wiper arm from  moving on the shaft. RIGHT ?
Well, tightening up that nut does NOT always  work !  The inside of the wiper
arm that wears out on the serrations of the  shaft and will eventually get
worn to the point it won't hold no  matter how much tension you put on it.
Then there's the problem of having  the proper washer under the nut.  That
washer has to have the inside  diameter large enough so that it will go over
the serrated part of the shaft or  your just tighten up the arm on the washer
which is butting up against the  serrations and the arm will still be lose
so yo try to tighten more and BANG  your broke your threads off.  BTDT too
many times before I learned the  WHOLE story !  Those washers are SPECIAL and
hard to find but they are out  there !

>>>>Re: How do you get to the passenger side wiper  shaft?<<<<

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
'87 Westy & Lionel Trains (_Collection for sale_
(http://frankcondelli.com/trainsal.htm) )
_Frank Condelli &  Associates_ (http://frankcondelli.com/busindex.html)  -
Vanagon/Vanagon Westfalia Service in the Ottawa Valley
_Vanagon Stainless Steel Exhaust  Systems_
(http://frankcondelli.com/exhaust.htm)
_BusFusion_ (http://www.busfusion.com/bfhome.htm)  a  VW Camper camping
event, Almonte, ON, June 11 ~ 14,  2009