

| Subject: | Short-finding technique was Re: Electrical help please! |
| From: | David Beierl |
| Date: | Wed, 20 May 2009 12:09:46 -0400 |
At 11:06 PM 5/19/2009, Aaron Robinson wrote: >So here are my questions: >1) Any tips on troubleshooting the wipers? >2) Any tips on troubleshooting the fuse issue? Here's a technique that can be useful in finding shorts: Wire up a stoplight bulb or other load in place of the fuse that's blowing. Now probe the circuit downstream of the lit bulb with a meter on millivolts scale, looking for millivolt differences in voltage to ground. Each time you find a lower reading, follow that path. When the reading stops decreasing you've found the short. The sensitivity of this technique increases proportional to the current flowing in the circuit, so the heavier the load the better up to the rated capacity of the circuit. This hasn't been discussed much here because opens are far more common in our vehicles than shorts. -- David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/ '89 Po' White Star "Scamp"
Have something to add on this topic today? Revive this thread in the forum »