David made this same excellent suggestion when I reported the same problem
awhile back.  My fridge had developed a "blowing-out" problem after I
removed it for servicing.  If this is your problem, you can fix it without
removing the fridge.  Just remove the external vent, and bend the hoses so
that they line up correctly by themselves before replacing the vent.  Now my
fridge never blows out, at any speed.

-Wes

On Tue, May 19, 2009 at 9:14 PM, David Beierl <dbeierl@attglobal.net> wrote:

> At 08:54 PM 5/19/2009, craig cowan wrote:
>
>> Yet alas, air is still getting in to blow it out! Any suggestions?
>>
>
> Also, the inner and outer parts of the body fitting need to line up
> by themselves, not be jacked into place by the mounting screws.  A
> broomstick makes a good aligning tool.
>
>
>
>  --
> David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/
> '89 Po' White Star "Scamp"
>