Thanks guys I will check the wiring from the temp II sensor to the ECU and
maybe try a shot of water dispersing WD40 first.

In a message dated 5/26/2009 2:25:03 P.M. Eastern Daylight Time,
magikvw@GMAIL.COM writes:

I have  to second Don's opinion. I am fairly confident (after years of
chasing)  that when I experienced this it was in the connection to the Temp
II  sensor. I replaced my sensor and all was well for a while and they  I
started having problems again - I pulled the connector off gave it a shot
of
WD-40 and it was fine. Now every now and then I have a problem - I just  do
the same thing and it will go away for months at a time. I'm sure it's  in
the wiring.

On Tue, May 26, 2009 at 1:54 PM, Don Hanson  <dhanson928@gmail.com> wrote:

> It sounds like it is the temp  II sensor.  Check the plug on that and the
> wires...Mine are all  brittle and the plug sucks.  If you unplug the Temp
II
> and the  running behavior doesn't change...that is probably it..some kinda
>  connection issue...since you say you know the sensor is good again.
Those
> things (the sensors themselves) are sometimes no good even when
new..Bosh..
>  Don  Hanson
>
>
>

--
Thanks,

Jeff
'90 Carat  (Grover)
'86 (We call this one Parts)
'78 Bus (Melissa) Patty's  Bus

**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/100126575x1222377034x1201454326/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=
MaystepsfooterNO62)