I would recommend welding at a local Mineke or similar place. They
fixed my old system temporarily for me this way.  Was very reasonable
fee.

I have now switched over to a S&S system.

Before I made the switch I had a couple of nasty holes in mine OEM
system. I tried everything. I used the paste, I tried using some thin
metal sheeting with some cheese grater clamps which held for a short
time. In the end the only solution was a complete replacement.

Other than that, check local yards for parts of get something off the
Samba.

One note on the S&S units, if you order them. Take them to be ceramic
coated or do it yourself by taking off the existing crap black paint
that is on there with some paint remover. Once done., get yourself
some VHT high temp exhaust 2,0000 degree paint, follow the
instructions exactly. Paint 2 light coats, then a 3 third. Bake 3x.
This will seal it. It took me several days to remove all the rust off
my total system and repaint/bake but it looks brand new again.
Hopefully this will last a bit longer now.

Robert
NY

On May 30, 2009, at 10:36 AM, Brian Honan wrote:

> Has anyone ever found a mirical substance to patch cracked head
> pipes with?
> anything must be cheaper and easyer than replacing the exhaust
> system. If
> anyone out there has 2.1  parts van on the east coast that has
> decent pipes
> on it hit me up.
>
> Brian Honan