>> Searched the archives and found a couple good tricks.  Usually
>> requiring one the somehow get a nut started on a threaded rod between
>> the cylinders.  My fingers are too big. After messing with it for
>> twenty minutes I ran down to the hardware store and got the
>> following:

No need to start a nut between the pistons.

Note: I had ONE cylinder off. All I was trying to do was put it back on.

Jim

On Jul 12, 2009, at 3:58 PM, Jim Felder wrote:

> I've done this with allthread and some nuts and washers. Works like a
> charm. Nothing else needed.
>
> Jim