At  7/14/2009 09:02 AM, Jim Lieb wrote:
>David,
>
>I had a 90 Multivan that had two rear facing jumpseats. They did not bolt to
>the floor. There were two recessed holes in the floor that the legs fit in.
>The back of the seat locked on to a bracket that was mounted on the back of
>the front seat pedestal. The bracket is what holds the seat in place and
>when locked the legs of the jumpseat cannot come out of the receiving holes
>in the floor. I am not sure if the camper floor has the receiving holes in
>it. You would have to pick up the carpet area and see what is underneath.
>
>Jim

This has been covered before and I recall hearing a great way to deal
with the holes in the floor, but I don't recall what the idea was.
I'd suggest a trip to the archives
http://gerry.vanagon.com/archives/vanagon.html

Rob
becida@comcast.net
In western WA with an '84 Westy and a summer before me.