So what about the Oxygen mix control that on AFM? should this not be
screwed with? How should it be set?

The Temp 2 sensor is new. It might be possible he connected the wiring
wrong.
?Which sensor is the temp 2? The one in between the the pushrods or
near the water pump unit?)

Now how does one set the for the throttle position switch setting and
Intake air sensor in the AFM?

Is there anything bad about buying a used breather tube vs a new one?

Thanks,

Robert
NY

On Jul 19, 2009, at 11:24 AM, Robert Stewart wrote:

> So my rebuilt engine is in, started on the first try but it's running
> rich.
>
> Any ideas?
>
> It as the original AFM, Idle control valve, stabilizer unit, and
> oxygen sensor, etc..
> Could it be as simple as I need a new O2 Sensor?
> if so should I get the splice in kind or the whole wire?
> My mechanic tells me that it might be the wire from O2 sensor from all
> the years of replacement slicing..
> http://www.van-cafe.com/home/van/smartlist_985/oxygen_sensor.html
>
> My mechanic tells me the original Breather Tower top comes off to
> easily.
> He opened and the top inner components of the unit seem to be
> deteriorating.
> Does it require replacement at $90 for the unit or can it refurbish it
> somehow and seal the top?
> http://www.van-cafe.com/home/van/smartlist_924/breather_system.html
>
> Thanks,
> Robert
> NY