At 07:31 PM 7/23/2009, Warren Lail wrote:
>US and ended up in say, Europe, I suppose.  Because now my clock
>displays the hours in the 24 hour format.  Does anyone know how I can
>get back to the USA (i.e., the 12 hour format)?

Warren, open up the clock module (take your time, it has to go back
together again).  When you get down to the circuit board, you'll see
two adjacent pairs of solder pads, one labelled 12h and the other
24h.  You want to end up with the 12h pads shorted together with
solder and a bit of wire, and the 24h pads open between them.  That
orta do it -- if not, then it's probably time for a new clock
module.  I suspect that the 12h pads were just bridged by solder and
that it has cracked.

d

  --
David Beierl - Providence RI USA -- http://pws.prserv.net/synergy/Vanagon/
'89 Po' White Star "Scamp"