The WBX injectors have a relatively proprietary barbed inlet.
I have only seen this style injector elsewhere on early Nissan/Datsun
280Z's.

VW went with a standard injector type used by many different manufacturers
in their watercooled EFI cars.  The 1.8 Golf/Jettas use a 19lb injector,
probably the same flow rate as the WBX injectors.

Previous discussions on the list have suggested building fuel rails from
aluminum injector stock.  Not too difficult for those with decent skills and
proper equipment.
These rails can be drilled to 13.5mm to fit the more common o-ringed
Golf/Jetta injectors.
This would eliminate the plastic fuel rails and allow use of injectors you
can buy new for around $100 a set.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Tom Hargrave
Sent: Thursday, July 23, 2009 2:44 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Injectors serviced by Witchhunter- Pics

In that case, you have a handful of spares - a good idea.

I wonder if anyone has an injector cross reference that can be used to
locate donors from non Vanagon's? Such a cross reference would ne very handy
to those searching scrap yards for parts.

Thanks,
Tom Hargrave
Our Web Sites:
www.kegkits.com
http://www.kegkits.com/JABF/
www.stir-plate.com
www.andyshotsauce.com
256-656-1924