Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Vitrfrigio install report
From:Richard A Jones
Date:Mon, 27 Jul 2009 15:59:37 -0600

Troy wrote:
> The fridge consumes 2.8 amps per hour. The average usage is somewhere around
> 20 minutes, perhaps 15 minutes if the temperatures are on the cool side,
> more if it's hot.  2.8 divided by three is close to 1 amp. I think it's a
> reasonable assumption based on the feedback I've gotten from people who own
> these fridges.

I installed a Vitri in July '08, so have used it for a year.
Hot temps and cold temps.  With the Vitri thermostat set to
about "5 am" the fridge typically runs about 4 minutes, then
shuts off for a variable amount of time, depending on the
ambient temperature.

When it is HOT--90++ degrees, the fridge runs 4 minutes and
waits 8 minutes, so runs 1/3 of the time.  1/3 x 2.8 amps
is where the ~1 amp/hr comes from.  That is worst case--
24 amps per day, worst case.

When it is cool-- <50 degrees--it runs 4 minutes and waits
35-45 minutes, so that would be around 7 amps per day.

The fridge temp doesn't seem to vary much with the thermostat
setting--but the freezer temp does.  See:
http://jones.colorado.edu/VW/Vitrifrigo/VitrifrigoTemps.txt

The above numbers are not theory--they are my observations.
My current *theory* is that instead of spending time arguing
about power consumption, you should spend the time INSTALLING
and USING a Vitri.  I think you'll then agree that it one of the
best mods to a Westy possible.  ;-)

Richard