This is really the best test but can be dangerous if you don't know what you
are doing!

Thanks,
Tom Hargrave
Our Web Sites:
www.kegkits.com
http://www.kegkits.com/JABF/
www.stir-plate.com
www.andyshotsauce.com
256-656-1924

-----Original Message-----
From: pdooley [mailto:psdooley@verizon.net]
Sent: Thursday, July 23, 2009 8:31 AM
To: 'Tom Hargrave'; vanagon@GERRY.VANAGON.COM
Subject: RE: Injectors serviced by Witchhunter- Pics

That's why I yank the injectors and fuel rail out of any motor with
suspected fueling problems and look at the spray patterns.
Just energize the fuel pump and momentarily ground the injectors, with a
fire extinguisher nearby of course.
I actually have a setup outside of the vehicle so an arrant spark won't
roast the vehicle.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Tom Hargrave
Sent: Thursday, July 23, 2009 9:16 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Injectors serviced by Witchhunter- Pics

Probably just cleaning and spray pattern & leak testing since you really
can't rebuild them. Injectors are basically poppet valves and they are
service items. They work until they wear out then you replace them with new
or tested used ones. But since they are just poppet valves & they wear,
don't expect tested used ones to last near as long as new replacements!

It's too easy to "try this, try that" when troubleshooting a problem. And
sometimes injectors are blamed for other issues just like oxygen sensors,
spark plugs & wires are blamed for other issues & they get changed out.
Also, thousands of gallons of injector cleaner are sold every year for the
same shot gun troubleshooting.