

| Subject: | Re: All accessories on aux batt |
| From: | Al Knoll |
| Date: | Mon, 3 Aug 2009 20:33:12 -0700 |
Charlie Wing of Boatowners/VanagonOwners Illustrated handbook of wiring says that for a 10' run you'll need 8AWG for a 3% voltage drop but if you can handle a 10% drop then 14AWG will do. (40A). Wing, Charlie, pp 108-112 (ISBN 0-07-071092-9) 1993 edition (DC hasn't changed much over the interim) Pensioner On 8/3/09, Al Knoll <anasasi@gmail.com> wrote: > > 8AWG? That's a manly wire! Of course the 30a capability of the lighter > socket might need that kind of supply, but I disremember whether the F3 also > supplies the lighter. I'll check on that presently. > > Pensioner > > > On 8/3/09, Bob Stevens <mtbiker62@gmail.com> wrote: >> >> A really simple way is to run an 8g fused wire from the aux battery + to >> the >> #3 fuse location under your dash. Remove the fuse and put a male spade on >> the end of the wire and plug that spade into either the top or bottom of >> the >> #3 female where the fuse was. That location runs your accessories (radio, >> cig lighter) and your kitchen is already plugged into the aux battery. >> bob >> >> On Mon, Aug 3, 2009 at 7:18 PM, Gilles H Turmel >> <gilles.turmel@sympatico.ca>wrote: >> >> > Hi, >> > I've tried to do a search in the archives to get the procedure to get >> all >> > my accessories on my aux batt. No luck. Does anyone has that >> procedure? >> > Best regards. >> > >> > >
Have something to add on this topic today? Revive this thread in the forum »