Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: 1988 Rebuilt Engine Stumbling at various RPM levels 2100-2300, 3400- 4000rpms
From:Jaime Forero
Date:Sat, 8 Aug 2009 14:49:24 -0500

I am in the middle of deciding what rebuilt engine to buy.  My van just
turned 200K on the mile counter and I feel it will need replacing soon.  Any
tips on what to get?? Westy?? Boston Bob, any others.  I know there have
been numerous Gigas of discussion on engines but it is always good to hear
from someone who just went through the process.
Cheers
Jaime

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Robert Stewart
Sent: Saturday, August 08, 2009 1:40 PM
To: vanagon@GERRY.VANAGON.COM
Subject: 1988 Rebuilt Engine Stumbling at various RPM levels 2100-2300,
3400- 4000rpms

I just got my Rebuilt Engine back in my automatic 88 wolfsburg. It's
been Stumbling at various RPM levels between 2100-2300rpm & 3400- 4000
rpm's.

It has good power through the band but if you are not pushing the
accelerator down and staying steady at any of the RPM ranges stated
above it will stumble once in a while, not continuously.

The engine only has 100 miles on it so far. Mostly country road
driving with very little highway driving.

It has a brand new bosch O2 sensor, all other sensors on the van are
new.

New Fuel Lines, Injectors are 2 yrs old. New fuel in the tank, all old
fuel in the tank was removed. All new fuel lines on the tank as well.
New Oil filter and Fuel Filter. Air Cleaner just cleaned.

Any ideas of what I should be looking for?

Could it be the advance timing on the engine?
Maybe it was set incorrectly?

AFM problem?

Thanks,
Robert
NY