I added a link to Karl's underseat installation page to the Propex page on
the wiki, at http://vanagonwiki.net/index.php/Propex#Below_Rear_Seat

If installation hintz 'n' tipz r available for how Frank the C did it in
the space between the reefer and the water tank (he left the water tank
in, didn't he?), I could add a link to that, too.
--
Mike "Rocket J Squirrel" Elliott
84 Westfalia: Mellow Yellow ("The Electrical Banana")
74 Utility Trailer. Ladybug Trailer, Inc., San Juan Capistrano
Bend, OR
KG6RCR

On 8/26/2009 1:00 PM Mark Tuovinen wrote:

> There is also option #3 from Frank C. in Canada.  His is in the lower
> cabinet between the fridge and the rear seat.  He eliminated the shore
> power outlet and took out the false wall inside the cabinet utilizing
> space that most never use or even know exists in the first place.  When
> we get around to adding a heater it will either be there or the bottom
> of the wardrobe though I am leaning toward the lower cabinet.  I will
> not put one under the seat for two reasons, we use that space too much
> to reduce its size and I will not make more holes in the floor of the
> van as we drive off pavement and I do not want mud and water causing
> problems.
>
> Mark in AK
>
> ----- Original Message ----- From: Rocket J Squirrel
> <camping.elliott@GMAIL.COM> Date: Wednesday, August 26, 2009 11:39 am
> Subject: Re: Propex and Vitrifrigo DIY install info? To:
> vanagon@GERRY.VANAGON.COM
>
>> Given the choice between under the bench seat, an area I use a lot
>> for storage, and at the bottom of the wardrobe, which I find more of
>> a hassleto access, I'd put the heater in the wardrobe. -- Mike
>> "Rocket J Squirrel" Elliott 84 Westfalia: Mellow Yellow ("The
>> Electrical Banana") 74 Utility Trailer. Ladybug Trailer, Inc., San
>> Juan Capistrano Bend, OR KG6RCR
>>
>>
>>
>
>