There prolly isn't a blue/white wire there behind the switch, but that
isn't the color you want. What you want is the gray wire. It goes from
there to the back of fuses 1 and 2 so you can pick it up in either place.

There is a blue/gray wire on the switch but it comes from the rheostat
and thus depends on the brightness setting for the instrument lights.

I am going by the Bentley colors only.

Mark

Rocket J Squirrel wrote:
> Just out of curiosity, can this be done w/o removing the dash? The buzzer
> wiring (my socket is empty, have to get a new buzzer) is accessible behind
> the fuse panel, and the headlight switch up in the instrument panel pod.
> I'm wondering if the blue/white headlight wire is also within reach behind
> the fuse panel.
>
> --
> Mike "Rocket J Squirrel" Elliott
> 84 Westfalia: Mellow Yellow ("The Electrical Banana")
> 74 Utility Trailer. Ladybug Trailer, Inc., San Juan Capistrano
> Bend, OR
> KG6RCR
>
>
>
> On 8/13/2009 1:00 PM Dug Smith wrote:
>
>> I've seen a couple of posting where people remove the key left in
>> buzzer, as
>> it's just annoying.  I decided to get some use out of it, so I clipped
>> the
>> gray/black wire going in to it, and Scotchlocked it to the blue/white
>> from
>> the headlight switch - tada, lights left on alarm :o)
>>
>> toodle pip,
>> --
>>        Dug Smith         | Terry Pratchett: It's almost
>> (mailto:dug@dugbert.com) |  impossible to ride a rock and roll
>> (http://www.dugbert.com) |  motorbike and stay on for three verses.
>>
>