But Make sure you screw those bolts back in NOT TOO TIGHT or you will shear
them off and its a pain to get it fixed.  Don't ask me how I know.
Michael in San Antonio
91GL AT 'Gringo'
73 Beetle

On Thu, Sep 24, 2009 at 2:41 PM, Roger Sisler <rogersisler2000@yahoo.com>wrote:

> There is a 10mm bolt that holds each bank of injectors to the head. Remove
> this bolt and the injectors will pull right out and still be hooked up to
> the fuel lines.Crank your engine and look to see if they are spraying fuel.
> Make sure the little rubber seal donuts are still in place when
> reinstalling
> them EZ to do all this.
>