Yep, I know where Mock Electronics is at - I did not know you were shopping
local.

Thanks,
Tom Hargrave
256-656-1924

Our Web Sites:
www.kegkits.com
www.stir-plate.com
www.andyshotsauce.com

-----Original Message-----
From: Jim Felder [mailto:jim.felder@gmail.com]
Sent: Monday, September 28, 2009 5:06 PM
To: Tom Hargrave
Cc: vanagon@gerry.vanagon.com
Subject: Re: Tantalum capacitors to stop blinking temp LED

But I don't need a hundred. You know where Mock's is, right? Seem to
remember you are local to me. There's no telling what you could get
them for if you bought all hundred. I just need to know that it's the
right value before I buy any of them, plus I need someone else to do
the work. I've got a spare temp gauge I don't mind sending off.

By the way, is the temp gauge the same for all years?

Jim

On Mon, Sep 28, 2009 at 4:59 PM, Tom Hargrave <thargrav@hiwaay.net> wrote:
> I'm sure that construction does not matter as much as value - here are
some
> aluminum electrolytic for $1.0284 each in quantities of 100.
>
>
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=4199PHCT-ND
>
>
> Thanks,
> Tom Hargrave
> 256-656-1924
>
> Our Web Sites:
> www.kegkits.com
> www.stir-plate.com
> www.andyshotsauce.com
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
> Jim Felder
> Sent: Monday, September 28, 2009 4:39 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Tantalum capacitors to stop blinking temp LED
>
> I recently asked in a post about curing the blinking light syndrome
> which was the proper capacitor, and someone--sorry, don't remember,
> maybe David B.--said it was a tantalum 22uF 16v or better.
>
> Mine is acting up again, after swapping it out this spring, and
> thoroughly enjoying not seeing it blink. Mine is an 83, if that
> matters.
>
> I have located a supply of 100 each of
>
> 22 uF @ 35
>
> 22 uF @ 35
>
> They are a dollar and a half each. I will be glad to go get as many of
> them as anyone wants, and mail them for free if I can just put them in
> an envelope. Someone just needs to confirm that either of them will
> work.
>
> And who was it who volunteered to solder it in? I don't expect it for
> free, but I know I would screw that part up. always do.
>
> Jim
>
>