

| Subject: | Re: fuel lines: if it ain't broke |
| From: | Mark |
| Date: | Sun, 4 Oct 2009 21:36:22 -0400 |
o.k., o.k. jeez guys - I'll replaced the stinkin' lines :-) thanks for the insights! Mark On Sun, Oct 4, 2009 at 8:43 PM, Randy C. Nunes <randycnunes@yahoo.com>wrote: > Mark, > > You asked this question to the wrong list. I don't think there is a single > person here who would recommend NOT CHANGING your fuel lines. > > Just have a look at Ben's website for some photos of why this pretty simple > job is worthwhile. > > Randy > http://www.fermentationtrap.com > Home Brewing and Winemaking Supplies > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Mark > Sent: Sunday, October 04, 2009 8:08 PM > To: vanagon@GERRY.VANAGON.COM > Subject: fuel lines: if it ain't broke > > Hello all - > > I'm replacing my gas tank and while I have it out I'm thinking of replacing > all the fuel lines too. Got the GoWesty fuel line kit - HOWEVER - I'm > re-thinking an entire fuel line replacement job. I got the little plastic > bugger out (the one prone to breaking and causing fires) - and I think I'm > going to stop there. Just based on how difficult, and messy it was getting > that one line out - I'm thinking I won't mess with the injectors, injector > rails, and seals. The lines appear o.k. and I fear messing something up in > finishing this job (never pulled an injector before). Any thoughts out > there? Should I stop - or go for it! The engine has 152,000 on it. > > Mark > > -- > Mark > 1990 Westy (2.1 - manual) > > > -- Mark 1990 Westy (2.1 - manual)
Have something to add on this topic today? Revive this thread in the forum »